Today has been an eventful one!
This afternoon I took delivery of the Cwm Prysor Fiddleyards from Tim Horn. Things didn’t go as smooth as hoped initially, regarding mating the boards to the main layout…..eventually though, we got there.
Here is how things look now!
Blaenau Ffestiniog/Trawsfynydd Fiddleyard below. The cassettes are split into loco, single coach passenger and two coach passenger/goods trains. They are clipped together with bulldog clips and the beauty of this, is it allows locos to be taken off and turned without actually handling them. However, do not touch both sides of the cassette at the same time when connected to the layout! 😉
Bala Fiddleyard below. The cassettes are connected to a transition piece which draws it’s power off the main board tracks temporarily. However for shows it will have it’s own connectors off the main bus wires.
Some extra items from Tim, the frontage to the platform made from laser cut MDF (sadly the brick work isn’t going to be visible to the public, because it looks very nice!)
The platform itself will be made up from polystyrene which will then blend into the hillside as the real thing did. Also can be seen is the entry culvert for the stream that ran into Llyn Tryweryn. This will be covered in Das modelling clay, before being carved to represent the stone work.
It’s been very enjoyable to actually run trains over the full length of the layout tonight. The only thing, is I must not get too distracted running trains, or I’ll never get the layout finished!
Thanks for your patience today Tim! It was well worth the effort!